4 Steps to add Machine Oil in Machinery

4 Steps to add Machine Oil in Machinery

Machinery should fill the engine oil regularly to ensure that it functions correctly. Running the machinery without oil can cause irreversible damage to the bearings and may even break down and hinder your business. To save money and time in your busy schedule, it’s a good idea to learn how to add machine oil to machinery and understand different ways of protecting your equipment from damage.

How to add oil to Heavy Machinery

Identify Machine Oil

Firstly, you need to choose your machine oil for machinery. It should be correspondent to the heavy machine being topped up. Then you need to select a proper transfer container for the machine oil. Before using this container, make sure it is clean and safe.

Now, put it into an S&R container. It has been sitting around with the lid off, collecting dirt particles or moisture.

It would help if you did not mistake using the same S&R container for all your machinery oils process.

After filling the S&R container, seal the spout. And clean spilled oil on the outside of the container.

Keep the container protected because you make your way through the plant.

In the end, determine how much oil the machine requires. This will help you with an indication of how much oil was lost and how much was added. In this way, you will save extra oil in the future.

4 Steps to add Machine Oil in Machinery

Free of Contamination

You should ensure the machinery area is free of contaminants before topping up. Then verify the machine oil tag to tag on the S&R container. If they match, then add oil; otherwise, not.

Using the wrong oil can be catastrophic to equipment. Once you have the right machine oil, confirm that it is safe for use before touching the equipment.

Then check the correct place and clean dirt, debris, product, water, etc., from the opening before exposing the machine.

You can use a sight glass to monitor the oil level. It should be clean and enable you to see the level.

Adding Machine Oil

Now, you need to open the fill port slowly. And keep a check for any potential contaminants that might enter the machine system.

Use the container’s spout to fill the port’s hole without making contact. And start adding machine oil slowly. Check the level indicator and track how much oil is added.

As you see a rise in the oil level, stop filling to let the level catch up. Then, Close the spout, replace the cap or plug and wipe up any spilled oil.

Check the Top-up

Check the amount of oil you added for future reference. Clean all S&R containers and verify that the identification tags are unbroken and noticeable.

Now, put the machine oil containers to their designation.

It would be best to revisit the machine about an hour after adding machine oil to check the equipment’s level, leakage, functioning, or any issue you might have missed. You can make a checklist and keep it in your practice.

While topping up, if the machine was in motion, there is a possibility of fluctuation in oil level. In this case, you need to adjust the oil level accordingly.

S&R containers can help you in preventing the possibility of contaminants from entering your system. Make sure to purchase these containers dedicated to specific work areas and lubricant types.

Machine Oil in Machinery

Wrapping Up

The machine manufacturer should be involved in all phases of the machine oil change process. This involvement starts with contacting them to determine the proper service and replacement schedules.

Moreover, The technician who performs the oil change is responsible for the following:

1) applying the machine oil

2) rechecking the machine and piston rings

3) adjusting the tension on any series or parallel shafts

4) disconnecting any auto level or auto vacuum systems.

Our machine oil is suitable for heavy machinery where high-temperature conditions are expected. The oil is fully synthetic, making it highly resistant to heat and providing long-term lubrication.

Slideway Oil – BRAE 68 and BRAE 32, MACBEND Tube Bending Paste – 20Ltr, and MACBEND Tube Bending Heavy Duty Bending Oil – 20Ltr or 205Ltr products are available at the platform. Contact us for a quote. 

Why Machine Oil is necessary for Heavy Machinery

Machine Oil

Machine oil is a kind of lubricant/fluid that is used in a diverse range of industrial applications. It was used in the manufacturing area we are talking about today to reduce wear and friction. The entire purpose of it is to protect the machine from corrosion, deterioration, and rust so that the user can keep it for as long as possible. Equipment like cranes, train tracks, cars .. just about anything! And this helps eliminate the expenses of buying new machines.

Why Machine Oil is necessary for Heavy Machinery

Machine Lubricant is necessary for Friction and Temperature Tolerance in Heavy Machinery. 

Friction and temperature tolerance can be problematic in industrial Machinery. Heat build-up over time can lead to decreased performance, additional maintenance, and downtime. Each machine requires its burning engine oil at different levels to run efficiently.

Machine oil is a lubrication maintenance agent for internal combustion engines and fuel-fed equipment. It keeps friction and temperature tolerable so equipment won’t deteriorate over time. This is true in any machine that uses rotating or reciprocating parts.

Machine Oil is necessary for Removing Contaminants in Heavy Machinery 

One of the essential parts of maintaining heavy Machinery includes applying machine lubricant.

The manufacturer uses machine lubricant in different parts of the machine, which are prone to contamination and wear. This helps in preventing contamination in the device and increases its life.

Machine Oil is used for keeping rubber gaskets and seals from drying out in heavy Machinery. 

Machine Oil is necessary for the proper functioning of mechanical equipment. Without machine oil, the rubber gaskets and seals in your heavy Machinery will dry out and fail. And then, you’ll be without a machine. The cost of repair can be costly and time-consuming. So, if you are serious about ensuring that your Machinery operates correctly and effectively all the time, then you need to have some machine oil on hand.

Machine Lubricant reduces Service and Maintenance costs in Heavy Machinery

Maintenance of Heavy Machinery is the major contributing factor to maintenance costs.

Heavy Machinery requires high maintenance levels, and depending on what kind of machine it is; it can be very costly to maintain. Machine lubricant is a lubricant that significantly reduces the amount of lubrication your devices need as well as the frequency, resulting in massive reductions in maintenance costs.

Machine Lubricant reduces Service and Maintenance costs in Heavy Machinery

Final Note 

Machine oil became a necessity with the introduction of the internal combustion engine. To function correctly, machines need regular lubrication to keep in working condition. The oil must be constantly supplied, along with belts and filters.

At Delahenty Machinery company, we stock a great range of high-quality machine oils and filters. Widely used in industrial equipment, they improve the performance and lifespan of your valuable machines. We deliver the best and most influential machine lubricant to the customers. Therefore purchase our machine oil products and enjoy the benefits of these products.

How to use Machine Lubricants


Machine lubricants, like any other oil, reduce the friction between moving parts in machines and equipment through a lubricating film applied onto surfaces where contact occurs. Friction is the force that opposes motion between surfaces and results in heat and wear of both surfaces.

Some machine lubricants are cooled to prevent additional heat as they work. You can apply cooling machine lubricants to increase its performance while adding some complexity concerning maintenance that involves handling and disposal.

Lubricants have a variety of uses on machinery. The primary purpose of a lubricant is to reduce wear, help bearings roll more freely, and reduce rust or corrosion over time. Many types of lubricants are available for machinery, with some common types including grease, oil, and wax. They also come in various viscosities to suit the use case. We’ll look at all four lubricants and their applications in this guide.

Oil Machine Lubricant

When dealing with any machinery, you must ensure that it runs efficiently and effectively. This is especially true when it comes to your oil drilling equipment. Without proper lubrication, you could have a situation where equipment breaks down rather than working correctly. Oil machine lubricants can do everything from prolonging the life of the machinery to reducing downtime to simply making the most efficient use of your fuel.

Oil is a lubricant used to reduce friction and wear between moving parts. Installing oil machine lubricants can make equipment more efficient and life expectancy longer.

Oil machine lubricants come in various viscosities, thicknesses, and performance levels. Using lubricants in an oil rig is integral to operating the machine.

When selecting your next lubricant for industrial uses, it’s essential to consider the oil’s properties and what you’ll be using it for. Each oil machine lubricant has its own unique set of characteristics.

Greases Machine Lubricants

A grease lubricant machine is a piece of special machinery used for smooth operation. In the commercial automobile industry, there are many heavy-duty machines and vehicles where these greased lubricants play an essential role in their smooth operation.

Greases are thickened lubricants designed to lubricate bearings, joints, and other moving parts. It is produced in several forms, such as wheel bearing grease, chain and belt lubricant, industrial gearbox grease, and molybdenum disulfide greases, which are used as a solid lubricant in parts of machinery that cannot accommodate more fluid lubricants.

This lubricate moving parts in engines, pumps, fans and other mechanisms. Grease has the advantage over oil because it remains in place, whereas oil circulates the engine. This is why you should use grease to lubricate certain parts of a machine – particularly those that usually need re-lubrication, such as gears and bearings.

Penetrating Machine Lubricants

An Overview of Penetrating Machine LubricantsLubrication is one of industrial machines’ most essential and overlooked maintenance aspects. Factories and manufacturing plants must ensure that their machines have adequate lubrication to prevent wear, reduce downtime, and provide proper operation.

While old-fashioned grease has been a trusted form of lubricant for many years, penetrant oils has brought significant changes in both cost savings and environmental concerns.

Penetrating oils are a great way to stop everyday problems dead in their tracks. They are also great to use if you have been working on a project but haven’t finished it yet. This oil is fast drying, which means it applies quickly and penetrates deep into the metal pores (or any other surface) without leaving a greasy surface behind.

In addition, they are easy to clean up after and won’t leave any residue behind. Penetrating lubricants, in general, can be great for many different things such as unlocking stuck locks, freeing stuck parts, removing beetles, moving stuck or rusted nuts or bolts, and even forming non-marring thread lock systems.

Dry Lubricants

The dry lubricant for heavy machinery is what replaces hard unions in old equipment. These new unions require no maintenance, do not leak, and provide less friction. So the machine operates faster and more efficiently.

Dry lubricants are generally used in large-sized industrial equipment that operates under heavy load conditions with temperatures ranging from 500C to above 1000C.

It is very economical and can reduce operating costs. Dry lubricants reduce frictional losses in all your rolling elements by 0.2% to 3%. That translates into a lot of savings and a lot less wear. It is perfect for excess, shock, heavy, and hard-to-quench applications like mining and off-road equipment.

Machine Lubricants

Final Note

Be sure to look for compatibility with your specific application. You should properly apply the lubricant at the correct locations of your machinery. This should help prevent your machine from wearing out quickly. With proper lubrication, you can ensure that it will last longer.

We recommend to inspect your machinery regularly. Particularly when dealing with machinery that carries a high load or produces a lot of friction. Ensure that all components move freely and do not rub against each other.

Delahenty Machinery provides our customers with the best lubricants and services of the highest quality; we have trained and experienced staff who will make your experience with us pleasant. Contact us for more details.