OSCAM – Rod Shear Range
Specifications
| Make | OSCAM |
|---|---|
| Model | Rod Shear Range |
Description
OSCAM – Rod Shear Range
Machines for cutting extremely hard rods, consisting of a solid cast single block processed with machine tools, and of an oil bath set of gears. They can be used both on a building site and in a pre-shaping plant and can be operated 24 hours a day in a continuous cycle. They cut iron of all degrees of hardness, including high-strength iron with the largest diameter. Diameter change doesn’t require any adjustment.
Model 240
- To cut rods with diameter up to 26 mm directly on site.
- Machine particularly suitable for building sites for civil and pre-fabricated structures.
- Equipped with 4-edged cutting blades
- 90 strokes per minute
- Remote pedal control
Model 17000
- To cut rods up to Ø 42 mm directly on building sites
- Equipped with 8-edged cutting blades,
- 50 strokes per minute
- Remote pedal control
Hydraulic Shear Model T150
- To cut rods up to Ø 55 mm.
- High powered hydraulic shear suitable for small shear lines and large infrastructural sites.
- Vertically moving mobile blade with blank holder. The working area has a sturdy mobile metal shield interfaced with a safety device. Highly resistant steel blades that can be used on 4 sides.
- Available in a special version to cut rods used with couplers
![OSCAM – Hoop Spiral Machine Model 86 2R [made in Italy]](https://www.delahenty.com.au/newwp/wp-content/uploads/2023/09/OSCAM-Model-86-2R-Hoop-Spiral-machine-small-300x300.jpg "OSCAM – Hoop Spiral Machine Model 86 2R [made in Italy]")
